HUC-8161

HOME > Product > Wireless Microphone > HUC Series > HUC-8161

Picture of HUC Series Wireless Microphone for Model No HUC-8161
Receiver Specifications
  • Preset 16 selectable UHF Channels.
  • Diversity technology permits minimum dropouts in the RF link.
  • PLL synthesized multi-channels.
  • Noise mute and pilot tone squelch circuit prevent unwanted signal and noise interference.
  • Equipped with balanced and unbalanced outputs.
  • Tuned antennas enable to maximize the effective range of the wireless link.
  • 1/2 U rack housing benefits space saving.
Frequency Preparation PLL Synthesized Control
Carry Frequency Range 600MHz -960MHz
Frequency Stability ± 0.005%
S.N Ratio > 105dB
T.H.D.(1KHz) < 0.6%@1KHz
Display LED
Display Contents Channel, Antenna A/B, RF/AF status
Controls Power On/Off, Channel selector Audio Level
Audio Output Level -12dB
AF Output Impedance 600
Squelch Pilot Tone & Noise Mute
Operation Voltage 12 -18V DC, 600mA
Output Connector 2 Balanceed XLR socket 1 Unbalanced dia 6.3mm socket
Dimension (W x H x D) 211 x 40 x 152 mm
Hand Held Wireless Microphone Transmitter
Frequency Preparation PLL Synthesized Control
Carrier Frequency Range 600MHz -960MHz
RF Output 10mW
Stability ± 0.005%
Frequency Deviation ± 48KHz
LCD Display Channel, Low Battery, Power On/Off
Controls Power On/Off, Channel Up/Down
Spurious Rejection < -60dBc
Audio Frequency Response 50Hz -16KHz
Battery UM3, AA 1.5V x 2
Body Pack Wireless Microphone Transmitter
Frequency Preparation PLL Synthesized Control
Carrier Frequency 600 MHz ~ 960 MHz
RF Output 10 mW
Stability ± 0.005%
Frequency Deviation ± 48KHz
Controls Power On/Off, Channel Up/Down
Spurious Rejection < -60dBc
Audio Frequency Response 50Hz ~ 16 KHz
Battery UM3, AA 1.5V x 2