HU-8116

HOME > Product > Wireless Microphone > HU Series > HU-8116

Picture of HU Series Wireless Microphone for Model No HU-8116
Receiver Specifications
  • Preset 16 selectable UHF Channels.
  • The easy, affordable way to use with the PLL synthesized multi-channels.
  • Diversity technology permits minimum dropouts in the RF link.
  • Noise mute and pilot tone squelch circuit prevent unwanted signal and noise interference.
  • LCD display.
  • Equipped with XLR balanced and unbalanced O6.3mm outputs.
  • Tuned antennas can extend the effective range of the wireless link.
  • 1U rack metal housing.
Frequency Preparation PLL Synthesized Control
Carry Frequency Range 600MHz -960MHz
Frequency Stability ± 0.005%
S.N Ratio > 105dB
T.H.D. (1KHz) < 0.6%@1KHz
Display LCD
Display Contents Channel, Antenna A/B, RF/AF Level meter, Low batt
Controls Power On/Off, Channel selector Audio Level
Audio Output Level -12dB
AF Output Impdance 600
Squelch Pilot Tone & Noise Mute
Operation Voltage 12 -18V DC, 600mA
Output Connector 2 Balancde XLR socket 1 Unbalanced dia 6.3mm socket
Dimension (W x H x D) 480 x 45 x 232 mm
Hand Held wireless Microphone Transmitter
Frequency Preparation PLL Synthesized Control
Carrier Frequency Range 600MHz -960MHz
RF Output 10mW
Stability ± 0.005%
Frequency Deviation ± 48KHz
LED Display Channel, Low battery, Power On/Off
Controls Power On/Off, Channel Up/Down
Spurious Rejection < -60dBc
Audio Frequency Response 50Hz -16KHz
Battery UM3, AA 1.5V x 2
Body Pack Wireless Microphone Transmitter
Frequency Preparation PLL Synthesized Control
Carrier Frequency Range 600 MHz ~ 960 MHz
RF Output 10 mW
Stability ± 0.005%
Frequency Deviation ± 48 KHz
Controls Power On/Off, Channel Up/Down
Spurious Rejection < -60dBc
Audio Frequency Response 50 Hz ~ 16 KHz
Battery UM3, AA 1.5V x 2